Why is My Smart Plug Not Connecting to Wi-Fi?

Why is My Smart Plug Not Connecting to Wi-Fi? : The capabilities of smart home equipment are remarkable. They are without a doubt the future and have the potential to significantly ease our lives. However, because these goods are still in their infancy, you may occasionally run into annoyingly small problems.

One of the most frequent problems you will encounter with these goods is that they lose connection to the internet or that you are unable to connect to it. But what should you do if your smart plug won’t connect to the Wi-Fi?

Here are a few potential causes for this to occur, along with some solutions.

Smart Plug Is Not Connecting to Wi-Fi

The most likely cause of your smart plugs not connecting to Wi-Fi is the app you’re using and your smartphone’s settings. The first step in solving the issue is to confirm if your Bluetooth, Wi-Fi, and location settings are all turned on.

There are a few additional causes, though, for which your smart plugs could be unable to establish a Wi-Fi connection. Depending on the brand you have, it may alter slightly; for example, instructions for a wifi smart plug may differ from that for a different brand.

However, there is some general counsel that is effective in all situations. To guarantee that you can establish a connection between the two, check the following factors.

Check Your Device Thoroughly

Your phone is where you will most likely run into problems while trying to connect smart plugs to your Wi-Fi. There are certain broad guidelines you may adhere to and a checklist you should check off to ensure this, but it will all depend on the software you are using to connect the plugs to the Wi-Fi.

  • Turn off low power mode. For some reason, low power mode interferes with the functionality of your apps and prevents you from connecting to your smart plugs. Therefore, one of the first things you should check to make sure is disabled is this.
  • Make sure your device’s Bluetooth, Wi-Fi, and location services are activated. This is another important thing to do. All of this can stop your smart plug from connecting to the Wi-Fi.
  • Ensure the app has been updated. You will want to make sure you have downloaded the most recent version of any apps you need. This is a rather typical issue for users of the Alexa app, but it’s also worth doing for other apps.

Your smart plug must first be inserted into the socket; once it has been detected by your smartphone, you should see a flashing light on the plug. At this stage, double-check your Wi-Fi password and email address details to make sure they are accurate and synced with your smartphone.

Check Your Internet Router

Even though we have found that issues with Wi-Fi routers and connecting to smart home devices are uncommon, you should still explore this if you have tried all other options.

Your smart plugs won’t know which Wi-Fi network to connect to if you don’t have the correct SSID and password for your router. When you first set up the plugs, you should be able to type this into the app you are using because they cannot connect without the password.

Check the Bandwidth of Your Internet

Another thing to consider is which internet band your smart plugs will use. You must connect to the 2.4 GHz frequency to use various apps, and you must also connect your plugs to the same band.

The 2.4 GHz frequency is used by smart plugs. The optimum band for smart plugs is 2.4 GHz since range, not speed, is the most crucial factor. Although 5.0GHz is undoubtedly the speedier of the two, it also has worse reliability.

This appears to be causing issues for users who use a mesh Wi-Fi setup. This means that your smart plugs can struggle to connect because they combine 2.4 GHz and 5.0 GHz together. Any smart home gadget is susceptible to this issue.

You might have to choose another pair of smart plugs if you can’t connect to the mesh Wi-Fi with your current set. It might be possible to set up another 2.4 GHz in your home for the plugs to connect to if you have already bought your plugs. This is a pain, but it may be the only option because you will need to connect to 2.4 GHz Wi-Fi.

Additionally, you might think about splitting your Wi-Fi bands, which some internet service providers don’t do automatically. Your ability to directly connect to each band facilitates the connection of your smart plugs.

The first step is to reconnect to your present Wi-Fi or home network. By doing this action, the smart plug’s problem that is causing it to “try to connect” might be fixed. You should double-check your Wi-Fi network configuration if it still doesn’t function.

Make sure it’s not connected to any VPN or firewall services if you’re using a separate router for your smart home. Whether nothing appears to be working, try configuring the Wi-Fi settings manually to see if the setup can be finished.

All in All

In conclusion, getting your smart plugs set up and connected to your Wi-Fi system isn’t always simple, especially if you are utilizing a mesh system.

But in many cases, you can easily resolve the issue because it’s either a glitch with your smartphone, the app you’re using, or your router at home. Given that we are still in the early stages of adoption, problems with smart gadgets are rather prevalent.

 

 

 

Related Videos about Why is My Smart Plug Not Connecting to Wi-Fi? :

 

 

Why is My Smart Plug Not Connecting to Wi-Fi?

smart life plug not connecting to wifi, my touch smart plug not connecting, kasa smart plug not connecting to wifi, smart plug won’t connect to 5ghz wifi, tp-link smart plug won’t connect to wifi, how to connect smart plug to wifi smart life, amazon smart plug won’t connect to wifi, esicoo smart plug not connecting,